Make labels

58 × 40 mm thermal labels

58 × 40 mm is the roll most label printers come with and the size marketplace sellers use for product labels. Each PDF page is one label, exactly that size, with bars made of whole printer dots.

  • 58 × 40 mm
  • 203 / 300 dpi
  • EAN-13 · Code 128

Add your products

The file is read on your computer. Nothing is uploaded.

Choose the label

Size, look and barcode type. Opens as soon as your products are in.

Download and print

A preview of every label and one PDF for your printer.

Your label shows up here

Add products on the left, or try the example.

Printing labels right

Thermal roll

  1. In the printer settings (Windows: Printers → your printer → Printing preferences) set the paper to the label size, for example 58 × 40 mm.
  2. Open the PDF and print with “Actual size” or 100 %. One PDF page is one label.
  3. Labels come out sideways? Tick “Turn a quarter” in More settings, or change the orientation in the printer settings.

Sticker sheets

  1. Print a test page on plain paper first, put it on top of a sticker sheet and hold both against the light.
  2. Print with “Actual size” or 100 %, paper A4 or Letter as in the preset. Turn off “Fit to page” and “Shrink oversized pages”.
  3. Still off by a millimetre or two? Set the printer offset in More settings; it is remembered for this sheet.
  1. 1

    Load the products

    Excel, CSV or pasted cells, with the barcodes from your seller account.

  2. 2

    Pick what to print

    Name, article, size, colour, material, country, EAC or CE mark: tick what you need.

  3. 3

    Print at 100 %

    Set the paper to 58 × 40 mm in the printer driver and print the PDF at actual size.

Setting up the printer

  1. Install the driver from the printer maker (Xprinter, TSC, Godex, Zebra).
  2. Open Printers → your printer → Printing preferences and add a paper size 58 mm wide and 40 mm high. Set the media to labels with gaps (gap usually 2 mm).
  3. Calibrate the printer to the roll. On most Xprinter models: hold FEED until it beeps, then release.
  4. Open the PDF and print with Actual size or 100 %.

Why 203 dpi matters

Most 58 mm label printers print at 203 dpi: 8 dots per millimetre, each dot 0.125 mm. Bars are made 0.25 or 0.375 mm wide, two or three whole dots, so all bars of a width come out equal. If your printer is 300 dpi (it says so on the box or in the manual), choose it in More settings.

What marketplace labels usually show

A scannable barcode for every unit, plus the article, name, size and colour; often brand, material, country of manufacture and conformity marks. Rules change: check the current requirements of your marketplace before a big print run.